What It Does
 
Stereo Workstation Software will infuse your computer with true Workstation performance capabilities. Your computer will become a Stereo Workstation. The Dedicated Task is to Tune Up the Sonic Performance of your Music and your System. It does this by implementing a Real Time Finite Impulse Response Filter Engine with fractional Hertz resolution. But don't be afraid of the Tech Words because all you really need to know is that this is the Ultimate Stereo Equalizer, the Ultimate Stereo Music Server, and the Ultimate Stereo Signal Analyzer.
 

Sonic Performance Tune Up
(Ultimate Stereo Equalizer)

  • Tune Up the Sonic Performance of your Music (CDs, DVDs, MP3s, WMAs, FLACs, etc.), by Adjusting Equalization Graphs, SubSonic RollOffs, Volumes, Balances, and Adaptive Volumes.
  • Play and Tune Up MP3s directly from an MP3 Player connected to a USB port on your Computer.
  • Store unique Sonic Performance Adjustments in a database for each Track on every CD/DVD Disc, MP3 Player file, or Imported Music file.
  • Automatic Disc Recognition (ADR) detects a Target Disc/File and retrieves the unique Adjustments for that Disc/File from the database.
  • Automatic Track Recognition (ATR) detects which Target Track is playing and uses the unique Adjustments for that Track to process the Music.
  • Automatic Remote Control (ARC) takes control of your computer CD/DVD drive or external CD/DVD Player to detect Discs and Tracks.
  • If you have a couple hundred Discs in your collection and if there are 10 Tracks per Disc then you could have a database containing many thousands of Sonic Performance Adjustments. ARC, ADR and ATR make it easy to automatically retrieve the correct Adjustments for your Music.
  • Have a Disc Session with all your Music Discs/Files and use Head In Loop feedback to create your Disc and Track Adjustments.

Import Export Record Playback
(Ultimate Stereo Music Server)

  • Create Import Discs (on the hard drive) which are virtual CD Discs and where the Tracks are Wave Files. Build up a library of Music Files and use the Stereo Workstation as a Sonic Performance Music Server.
  • Play an Import Disc from the hard drive just like you would play a real CD from the CD drive.
  • Import all the Tracks from a CD to an Import Disc. (CD rip operation.)
  • Import MP3 (and other formats) Music files directly from your MP3 player, Flash Drive, or CD into an Import Disc.
  • Record Adjusted Music that is playing from a CD/DVD Disc or an Import Disc into a new Import Disc. The Music from each Adjusted Track of the source Disc will be stored into sequential Wave File Tracks of the recorded Import Disc.
  • Export Import Discs back to your MP3 player, to a Flash Drive, or to a CD (CD burn operation).
  • You will be able to import your MP3 music, Adjust the Music, and Export it back to your MP3 Player for an vastly improved listening experience.
  • You will be able to import your CD Music, Adjust the Music, and Export it (burn it) to a new CD for superior Sonic Performance for your car system.
  • Download Title, Artist, and other Metadata for each Music File or CD Track using the Gracenote Music service.

Signals Measure Calibrate
(Ultimate Stereo Signal Analyzer)

  • Stereo Waveform Oscilloscope lets you view your Music. Adjust the Amplitude Gain, and Sweep Rate. Setup for Single Sweep or Auto Sweep operation.
  • Stereo Spectrum Analyzer lets you view your Music frequency components. Adjust the Spectrum Center, Range, and Block Size. Set display for Linear, or Logarithmic operation. Also setup for Average, Peak, or Instantaneous mode.
  • Adjust the Trigger Level, Trigger Slope, Trigger Delay, Trace Mode, Trace Persistence, and Compensation, for both of the above measurement instruments.
  • Test Tones Mode lets you generate complex Muti-Spectral Test Tones and various Noise characteristics to calibrate your system.
  • Calibrate Mode lets you generate Triangle, Square, and Burst Sine waves to calibrate your system.
  • Enable special Microphone Connected Mode (you supply microphone) to perform your own custom calibration procedures or to use built in Auto Baseline operation.
  • Computer Aided Adjustment (CAA) with Head In Loop feedback enables easy generation of Baseline Adjustments.

StandAlone and Base/Mobile Configurations

  • Configure StandAlone if your Stereo Workstation will be a single Desktop or Laptop computer.
  • If you have two connected computers (Wireless or Hardwired) you can configure one as the Base computer (put near equipment) and the other as the Mobile computer (use at listening position).
  • The Mobile computer will usually be a Laptop and the Base computer will usually be a Desktop. But any type can be used at either location. Ideally the Mobile computer will be a Tablet PC type for best graphics control.
  • The Mobile computer can be as far away as your Wireless connection or your Hardwired cable will allow.
  • Play CD/DVD Music from any Mobile or Base computer CD/DVD drive. The Mobile computer will send the Music data over the Wireless or Hardwired connection to the Base computer. The Base computer will process the Music with your Sonic Performance Adjustments and then send it out to your system.
$20 OFF
STEREO
WORKSTATION
SOFTWARE
(Limited Time)